Hi,
at first i want to say that English is not my first language.How to create a subsystem in shematic using XILINX ISE and how to add it in my library?
Thank you for your ansewer.
create a subsystem in shematic using ISE
3 posts
• Page 1 of 1
create a subsystem in shematic using ISE
by rose » Wed Aug 12, 2009 7:11 pm
- rose
- Posts: 2
- Joined: Wed Aug 12, 2009 4:49 pm
by elpuri » Thu Aug 13, 2009 10:35 am
From the menu select Project->New source. Select schematic as the source type. Draw your schematic (instructions here: http://www.xilinx.com/support/documenta ... e11tut.pdf).
Instantiate in VHDL or verilog just like you would instantiate a HDL module. Or you can create a schematic symbol for it to use in another schematic by clicking the schematic you just created in design tab's hierarchy box and then from the process box click open the design tools and double click 'Create Schematic Symbol'.
Instantiate in VHDL or verilog just like you would instantiate a HDL module. Or you can create a schematic symbol for it to use in another schematic by clicking the schematic you just created in design tab's hierarchy box and then from the process box click open the design tools and double click 'Create Schematic Symbol'.
- elpuri
- Posts: 55
- Joined: Thu Apr 12, 2007 6:55 pm
3 posts
• Page 1 of 1