Hi all.
I just got my first FPGA dev board, the ML507 with Virtex-5 FPGA (XC5VFX70TFFG1136).
I checked the ISE WebPACK software only to notice that it doesn't list the FX70 model as a supported device.
Is there any other way to get VHDL into the device, other that the $3k ISE?
noob; software for Xilinx ML507 board
4 posts
• Page 1 of 1
noob; software for Xilinx ML507 board
by tmessu » Mon Jan 25, 2010 5:39 pm
- tmessu
- Posts: 2
- Joined: Mon Jan 25, 2010 5:11 pm
by tmessu » Mon Jan 25, 2010 7:22 pm
Except that I was cheap and got this one: http://www.xilinx.com/products/devkits/ ... -UNI-G.htm
It does state that "Development tools and PC download cable are not included and must be ordered separately", but at that time I thought that it wouldn't matter =)
It does state that "Development tools and PC download cable are not included and must be ordered separately", but at that time I thought that it wouldn't matter =)
- tmessu
- Posts: 2
- Joined: Mon Jan 25, 2010 5:11 pm
by rberek » Tue Jan 26, 2010 4:53 pm
The only thing I can suggest is to contact Xilinx and explain the situation. Perhaps they'll send you the device-locked version of ISE that you'll need. Unless the $1000 price differential pays for the software...
The free Webpack always leaves out the higher end FPGAs.
Good luck
r.b.
The free Webpack always leaves out the higher end FPGAs.
Good luck
r.b.
- rberek
- Posts: 65
- Joined: Wed May 23, 2007 5:32 pm
4 posts
• Page 1 of 1