Digital Oscilloscope a Dragon board.


Digital Oscilloscope a Dragon board.

Postby Lan Tran » Fri Dec 23, 2005 1:50 pm


First thanks for - It help a lot for new FPGA users !

I plan to use Dragon board anf Flash to do the digital oscilloscope.
The code on the web site is for Pluto and flash so it need to modify
to run digital oscilloscope under Dragon-Flash boards. How complicate to
modify for Dragon board and do you have any advise on this ?

In the 10Base T- interface project . Do this code work for Dragon board too ?

Only the Dragon board has PCI interface so in the PCI interface project the code was write for the Dragon board. Please do correct me if I was wrong.

Again, thank so lot for - It helps FPGA less mistiness :P

Lan Tran
Posts: 9
Joined: Thu Dec 22, 2005 4:27 pm

Postby fpga4fun » Fri Dec 23, 2005 7:52 pm

1. yes, it needs to be modified. I provided a sample (compiled) project that works on Dragon with the Flashy boards.
2. yes, 10BASE-T works with Dragon
3. yes, the PCI project was developed with Dragon
Site Admin
Posts: 837
Joined: Thu Sep 18, 2003 6:47 am

Return to PCI FPGA board